Patterns & Projects

Chip-Carve an Heirloom Hand Mirror

Use a few simple cuts to transform a simple blank into a meaningful gift

By Wayne Barton

This organic inspired design combines stylized leaves with geometric designs. The combination of classic and modern makes it a good choice for almost adults and children. The durable design will allow it to be passed down from generation to generation.

Getting Started

Transfer the pattern to the blank. Cut around the perimeter. Center and trace the mirror insert onto the opposite side and cut the recess with a router. The recess should be slightly deeper than the thickness of the mirror. Then, use a round-over bit or sandpaper to remove the sharp corners.

Carving the Mirror

You can carve this mirror with just two knives. This design combines traditional three corner chips with a few variations on those traditional chips with an leaf motif. Use standard chip carving techniques for the geometric chips. Carefully remove the wood around the leaves and berries with the chip carving knife. Then, carve the leaf veins by making a simple two-sided line cut. Use a stab knife to add accents.



The final book from the leading icon in US wood chip carving, Wayne Barton offers his expert instruction and inspiration based on a lifetime of study, understanding, practice, and achievement. This book details:

  • Barton Capitals and Foliated Alphabet templates
  • Barton’s philosophies knowledge and expert instruction
  • Inspirational gallery of Barton’s finished work
  • Step-by-step project to illustrate Barton’s process
  • The fundamentals of tools, materials, and more!

Preview or Purchase the Joy of Chip Carving

Finishing the Mirror

If you carved the mirror from an attractive hardwood, such as butternut or walnut, apply an oil finish to accent the grain. When the oil finish is dry, apply a clear satin polyurethane. If you carved the mirror from basswood, I suggest a medium brown stain to accent the piece. After you apply the stain, seal it with clear satin polyurethane. Use epoxy to secure the mirror in the recess.


•  Basswood or butternut, 5/8″ (1.6cm) thick: 4 5/8″ x 11 1/4″ (11.7cm x 28.5cm)
• Graphite paper
• Polyurethane gel and spray: satin
• Stain (optional): nutmeg

• Band saw or scroll saw
• Chip-carving knives


Get the patterns here!



CLICK HERE to see more great projects from Woodcarving Illustrated Summer 2017 (Issue 79). CLICK HERE to purchase the issue.

Comments are closed.