Patterns & Projects

Gargoyle Cane Pattern

By Shawn Cipa

After researching the mysterious art form of gargoyles, I wondered how I could integrate a carved gargoyle with a subject dearer to my heart: canes and walking sticks. One thought that crossed my mind when I first studied images of classic waterspouts, or “true” gargoyles, was, “That would make a great cane handle!”

I needed to work the design into a shaft and determine how to make it strong enough to support weight. This design is typical of a classic Notre Dame cathedral gargoyle. I have arched the overall shape a bit in order to have it fit the hand better, and I omitted the drainage channel that normally would run the length of the carving.

I use mahogany for the handle. Mahogany is strong, but not too hard to carve. Avoid using a softer wood such as basswood for this project, as it may easily snap when in use. Even better would be a much harder wood, such as cherry or maple, but they can be quite difficult to carve. The shaft is swamp maple. I chose swamp maple because I like the bark. You can choose just about any wood you like for the shaft, but be sure it is strong and resistant to dents. It is important that the total diameter where the shaft joins the handle is no more than 1 ½” (38mm), otherwise you will not be able to taper the sleeve to a seamless fit–1 ¼” (32mm) would be preferable. Cut the shaft’s overall length longer than you think you will need–you will be able to cut it down when the project is all together later.


• Mahogany or wood of choice: 1 1/2″ (38mm) x 2 1/2″ (64mm) x 7 1/2″ (19.1cm) (handle)
• Mahogany or wood of choice: 1 1/2″ (38mm) x 1 1/2″ (38mm) x 2 3/4″ (70mm) (shaft sleeve)
• Swamp maple or wood of choice: 1 1/4″ (32mm) to 1 1/2″ (38mm) x 48″ (12.2m) (shaft)
• Polyurethane
• Threaded rod: 1/4″ (6mm) dia. x 8 3/4″ (22.2cm) long (to strengthen the cane)
• Steel wool: 000, 0000
• Wood glue

Carving tools of choice
• Drill with a long 1/4″ (6mm)-dia. drill bit

CLICK HERE to download the Gargoyle Cane Pattern

For more information on carving gargoyles, purchase Shawn Cipa’s book Carving Gargoyles, Grotesques, and Other Creatures of Myth. If you’ve ever wanted to carve a gargoyle, grotesque, chimera, or guardian, or just understand their differences, this unique book will guide you from start to finish. It is available from for $19.95 plus S&H.

View step-by-step instructions for the gargoyle cane in Woodcarving Illustrated Summer 2009 (Issue 47).

Comments are closed.